Lead Slag Reducer (Cast Plate. Alloy)
Alloy furnace: furnace temperature of 400 ° C or so, when the lead ingot has been completely dissolved, ready to fish slag before, according to the 1000: 1 ~ 2 ratio of adding slag remover (such as 10 tons of furnace to add 20k g), evenly covered in the alloy furnace lead slag surface, stirring fully 5 ~ 10 minutes, can be observed that the slag is gradually loosened
Classification:
PRODUCTS
Key words:
Lead Slag Reducer (Cast Plate. Alloy)
Product Description
Actions and Mechanisms
By changing the interfacial tension and surface tension between lead or lead alloy and its oxides, reduce the bonding force between the melt and slag body, separate the oxides and impurities fully from the lead alloy liquid or lead liquid, improve the mobility performance of the melt to achieve effective purification of lead or lead alloy, and at the same time can escape a large number of bubbles to the melt to play a certain stirring effect, and will be entrapped in the metal liquid, adsorption of slag fully turned and hauled to the surface of the metal liquid to improve the quality of products, also conducive to the thorough fugitive slag.
Product Advantages
1. Less smoke and dust, no irritating odor, no toxic and harmful gases, to achieve the purpose of green environmental protection.
2. After using slag reducing agent, it can greatly reduce the amount of slag, reduce the content of metallic lead in lead slag, and compress the cost of lead consumption.
3. Effectively prevent the large loss of various valuable metals in the lead liquid, eliminate the harmful impurities in the alloy, improve the casting quality, so that the plate grid shows better oxidation resistance and corrosion resistance.
4. Increase the fluidity of lead liquid, make the alloy composition evenly distributed, ensure the consistency of the composition of the plate grid.
Product Appearance
Grayish-black powder
Usage
1, alloy furnace: furnace temperature of 400 ° C or so, when the lead ingot has been completely dissolved, ready to fish slag before, according to the 1000: 1 ~ 2 ratio of adding slag remover (such as 10 tons of furnace to add 20k g), evenly covered in the alloy furnace lead slag surface, stirring fully 5 ~ 10 minutes, can be observed that the slag is gradually loosened, and the color has become close to the yellow earth color. The slag can be picked up and weighed, and can be assayed for changes in the lead content of the slag, compared with the slag before the addition of slag remover. At this time, the rate of decline in lead content should be regarded as an increase in the declared yield, which directly increases the output of the alloy. Improved economic efficiency.
2, plate grid furnace: can be more slag in the plate shed slag according to 1000: 1 ~ 2 ratio of slagging agent evenly covered in the furnace lead slag surface, stirring with tools to make it fully with the lead liquid, lead ash contact, so that the metal oxidation of me and the separation of liquid metal lead occurs, to be lead ash (metal oxides) completely separated from the liquid metal lead into a loose slag, the lead ash fish out. The use of slag fishing tool should have liquid leakage holes at the bottom, should be considered in the slag of liquid metal lead is more fully recycled, at this time the liquid metal lead within the lead ash can be 逬 step back to the plate grid furnace fully.
Product Packaging
This product is packed in outer plastic woven bag and inner plastic bag, net weight 25kg/bag, customization is acceptable.
Related Products
Consulting
immediate consultation
Fax: +86-533-5880388
Mailbox:785111464@qq.com
Address: Longquan Industrial Zone, Zichuan District, Zibo City, Shandong Province
SAF Coolest v1.3 设置面板 RVZSX-AGOV-ISSWE-ZSD
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page